Biamperometric neutralisation titrations in non-aqueous solvents applying tin electrode pair for the end-point detection

Summary Tertiary amines and salts of organic acids in acetic anhydride with 5% of acetic acid were titrated applying a biamperometric indicating system consisting of a polarised or unpolarised pair of tin electrodes by means of 0.1 N perchloric acid in glacial acetic acid. Amounts of 15.4–29.8 mg were analysed with average deviations of <0.6%, the results obtained being in a good agreement with those of potentiometry. The biamperometric end-point detection using an indicating system of polarised pair of tin electrodes can be applied for coulometric determinations of these bases with satisfying accuracy. By means of anodic generation of hydrogen ions in the presence of hydroquinone amounts of 0.5–1.0 mg were titrated with average deviations of < 1.3%. The results obtained were compared with those obtained of catalytic thermometric and photometric titrations.

---

Biamperometrische Neutralisationstitrationen in nichtwärigen Lösungsmitteln unter Anwendung eines Zinn-Elektrodenpaares als Indicatorsystem

Zusammenfassung Tertiäre Amine und Salze organischer Säuren werden in Acetanhydrid mit 5% Essigsäure durch Titration mit einer 0,1 N Lösung von Perchlorsäure in Essigsäure bestimmt. Das verwendete biamperometrische Indicatorsystem besteht aus einem Paar polarisierter oder nichtpolarisierter Zinnelektroden. Mengen von 15,4–29,8 mg wurden mit einer mittleren Abweichung von <0,6% analysiert. Die Ergebnisse stimmen gut mit denen von potentiometrischen Titrationen überein. Die biamperometrische Endpunkttechnik mit polarisierten Zinnelektroden kann für coulometrische Bestimmungen dieser Basen mit zufriedenstellender Genauigkeit benutzt werden. Durch anodische Erzeugung von Wasserstoffionen in Gegenwart von Hydrochinon wurden Mengen von 0,5–1,0 mg mit einer mittleren Abweichung von < 1,3% titriert. Die Ergebnisse wurden mit denen von katalytisch-thermometrischen und photometrischen Titrationen verglichen.

     

Identification of ochratoxin A in food samples by chemical derivatization and gas chromatography-mass spectrometry.

The contamination of foods with ochratoxin A can be determined very sensitively by high-performance liquid chromatography (HPLC) with fluorescence detection. A novel procedure is described to confirm OA-positive results quantitatively down to the HPLC detection limit of 0.1 ppb. For this, ochratoxin A in the sample extract is converted into its O-methylochratoxin A methyl ester derivative, which is identified subsequently by gas chromatography-mass spectrometry negative-ion chemical ionization and multiple ion detection modes using the hexadeuterated O-methyl-d3-ochratoxin A methyl-d3 ester derivative as internal standard for quantification. In the analysis of more than 60 contaminated samples, the procedure was found to be very accurate.     

A microcomputer-controlled titrator for automated individual analysis

A titration unit for automatic analysis systems is described. The titrator performs different titrations specified by strings of digital parameters. It has 4 independent titration stations with individual electrode systems. A multiburette with 20 cylinders provides all stations with the necessary reagents. End-point titrations, and incremental and equilibrium titrations are controlled by a microcomputer. In combination with a sample transport and a desk calculator, the titrator can be used to process automatically samples of different natures which require different treatment.     

Dual-label autoradiographic analysis of human skin fibroblast and myoblast proteins by two-dimensional polyacrylamide gel electrophoresis using immobilised pH gradients in the first dimension

Horizontal two-dimensional polyacrylamide gel electrophoresis with immobilised pH gradients in the first dimension has been applied to the analysis of human skin fibroblast and muscle myoblast total cell proteins. Excellent two-dimensional separations of skin fibroblast proteins were obtained using pH 4-10 immobilised pH gradient gels with a long interelectrode distance (16 cm), but resolution was degraded, particularly of the more acidic proteins, by the use of shorter (10 cm) gels. Improved resolution of acidic and basic proteins was obtained using separate pH 4-7 and pH 7-10 immobilised pH gradient gels respectively in the first dimension. Two-dimensional protein maps of skin fibroblast proteins were visualised both by silver staining and by autoradiography of samples labelled synthetically with [35S]methionine. Horizontal two-dimensional electrophoresis, using pH 4-7 and pH 7-10 immobilised pH gradient gels in the first dimension, was applied to the analysis of protein samples from skin fibroblasts and muscle myoblasts dual-labelled synthetically with [35S]methionine and [75Se]selenomethionine in an attempt to identify sets of proteins specific to each cell type. In addition, two-dimensional maps or protein samples derived from normal individuals and patients with Duchenne muscular dystrophy were compared to search for protein changes associated with the disease state. Although sets of qualitative protein spot differences were observed by visual inspection of the two-dimensional gels, more rigorous qualitative and quantitative analysis of the patterns using a computerised analysis system will be required to obtain the maximum amount of information from these data.     

Proton bound homodimers and heterodimers of amides and amines in the gas phase. Equilibrium studies by Fourier transform ion cyclotron resonance spectrometry

By injection of the proton bound homodimer [DMF.H+.DMF] of N,N-dimethylformamide (DMF) generated in an external ion source into a mixture of DMF and a second base within the cell of a Fourier transform ion cyclotron resonance (FT-ICR) spectrometer the equilibria between [DMF.H+.DMF] and the other possible proton bound dimers [DMF.H+.base] and [base.H+.base] have been studied for 13 different bases. Strongly polar bases like aliphatic amides and dimethyl sulfoxide (DMSO) exchange both DMF in [DMF.H+.DMF] by a two step process, while the almost non-polar amines exchange only one DMF. If the base is a primary or secondary amine, the proton bound heterodimer [DMF.H+.amine] reacts further by the addition of one DMF to create a proton bound trimer [(DMF)2.H+.amine]. The affinity deltaG(DMFH+) of the bases towards protonated DMF relative to neutral DMF depends linearly on the difference deltaGB of the gas phase basicity of DMF and the other base, but different correlation lines are obtained for polar and non-polar ligands (deltaGDMFH+ = 0.44GB(base)-375 [kJ/mol] (r = 0.97) and deltaGDMFH+ = 0.46GB(base)-397 [kJ/mol] (r = 0.99), respectively). This different behavior is explained by a different character of the proton bridge in the heterodimers containing only polar ligands and those incorporating a non-polar ligand besides DMF. The former dimers contain a more or less symmetric proton bridge while the latter can be viewed as a protonated base solvated by DMF. The available data have been used to calculate the molecular pair gas phase basicity of DMF and the 13 bases used and to estimate the dissociation energies of the bonds of the proton bridge in various proton bound heterodimers.     

Electron and light microscopical investigation of defect structures in mesophases of pharmaceutical substances

 Transmission electron microscopy of freeze fractured and replicated samples (TEM) and polarizing light microscopy (PLM) are used to investigate the defect structures of the thermotropic and lyotropic mesophases of the non-steroidal antiinflammatory drug fenoprofen sodium and of the thermotropic mesophase of the nonionic surfactant sucrose oleate (O1570). All mesophases have a layered, smectic structure. The thermotropic liquid crystal of feno-profen sodium is an interdigitated smectic A phase (smectic Ad) having the highest viscosity of the investigated samples. The thermotropic mesophase of the sugar ester is also of the type smectic A, likely to be of subtype smectic A2 (bilayered smectic structure). The lyotropic mesophase is of lamellar liquid crystalline nature and has a much lower viscosity than the thermotropic mesophases. In the PLM the lyotropic fenoprofen mesophase has a strong tendency to form a pseudoisotropic texture, indicating a strong tendency to form undisturbed layered structures. Other textures exhibited in the PLM are fan-shaped texture and maltese-cross texture. Confocal domains, cylinders, pits and peaks as well as screw dislocations are found in great number in the TEM. However, no greater regions of undisturbed lamellar arrangement in the lyotropic mesophase could be detected. The only texture of the thermotropic fenoprofen mesophase visible in the PLM is the fan-shaped texture, indicating confocal domains as predominant structural elements. However, no confocal domains (tori or Dupin cyclides) are found in the TEM. In the PLM the sugar–ester mesophase exhibited a fan-shaped texture, maltese crosses and oily streaks as dominant textures. In the TEM only a few +π and −π disclinations and imperfect confocal domains could be detected. The discrepancies in the appearance of defect structures and textures between the mesophases as well as the discrepancies in the findings in the PLM and in the TEM investigations are caused by the different sample preparation and the different viscosities of the mesophases. Received: 28 May 1997 Accepted: 2 September 1997     

Structural evolution of hexa-peri-hexabenzocoronene adlayers in heteroepitaxy on n-pentacontane template monolayers

The growth and structure of self-assembled adlayers of hexakis(n-dodecyl)-peri-hexabenzocoronene (HBC-C12) adsorbed on highly ordered pyrolitic graphite (HOPG) decorated by an n-pentacontane (n-C50H102) monolayer have been investigated by scanning tunneling microscopy (STM). Whereas on HOPG the HBC-C12 molecules readily self-assemble into a unique stable 2D structure, on the [n-C50H102 monolayer/graphite] system we observe morphological phase transitions with formation of time dependent alpha, beta, and gamma phases (alpha-->beta-->gamma). The initial alpha-phase is similar to that obtained on bare graphite, while intermediate beta- and final gamma-structures present molecular dimers and rows, respectively. The observed two-dimensional polymorphism is due to weak interaction between HBC-C12 molecules and n-C50H102-modified graphite substrate. Our results constitute an important step toward the control of the growth and structure of highly ordered monolayers of functional conjugated molecules by modifying the graphite surface with an n-alkane monolayer of appropriate chain length.     

Adding water to sugar: a spectroscopic and computational study of alpha- and beta-phenylxyloside in the gas phase

The gas phase structures of phenyl alpha- and beta-d-xylopyranoside (alpha- and beta-pXyl) and their mono-hydrates have been investigated using a combination of resonant two-photon ionization (R2PI), ultra-violet hole-burning and resonant infrared ion dip spectroscopy, coupled with density functional theory (DFT) and ab initio computation. The hole-burning experiments indicate the population of a single conformer only, in each of the two anomers. Their experimental and calculated infrared spectra are both consistent with a conformational assignment corresponding to the computed global minimum configuration. All three OH groups are oriented towards the oxygen atom (O1) on the anomeric carbon atom to form an all trans(ttt) counter-clockwise chain of hydrogen bonds. The mono-hydrates, alpha- and beta-pXyl(H(2)O) each populate two distinct structures in the molecular beam environment, with the water molecule inserted between OH4 and OH3 or between OH3 and OH2 in alpha-pXyl(H2O), and between OH2 and O1 in either of two alternative orientations, in beta-pXyl(H2O). In all of the mono-hydrated xyloside complexes, the water molecule inserts into the weakest link of the sugar molecules' hydrogen-bonded chain of hydroxy groups, creating a single extended chain, strengthened by co-operativity. The all-trans configuration of the xylose moiety is retained and the mono-hydrate structures correspond to those calculated to lie at the lowest relative energies.     

Iron-catalyzed cross-coupling reactions. A scalable synthesis of the immunosuppressive agent FTY720

A chemo- and regioselective cross-coupling reaction of the functionalized aryl triflate 5 with octylmagnesium bromide catalyzed by cheap, nontoxic, and environmentally benign Fe(acac)(3) sets the basis for a practical and scaleable synthesis of the octylbenzene derivative 6, which serves as a key building block for the preparation of FTY720 (1). This 2-amino-1,3-propanediol derivative shows highly promising immunosuppressive properties and is currently in human clinical phase III trials.     

Case Study: Doping Substances in Equestrian Food Supplements

In the course of investigations on equestrian supplemental products for the presence of doping substances, two products were found to contain forbidden substances. As reported earlier a plant extract (Mexican cactus extract) named “Energy 5” contained the anabolic androgenic steroids (AAS) stanozolol, 17β-hydroxy-17α-methyl-5α-androstane-3β-ol (3β,5α-THMT) as well as mestanolone not declared on the label. In the present study, a product called “Super Kalm Paste” was tested. Analysis by gas chromatography - mass spectrometry (GC-MS) revealed that the preparation contained the class I anti-arrhythmics quinine (trade names Kinidin^TM, Durules) and cinchonine. The samples were prepared according to a sample preparation procedure established for anabolic steroids in nutritional supplements for humans. The sample treatment comprised the extraction and purification of the analytes as well as the chemical conversion with N-methyl-N-trimethylsilyl-trifluoracetamide (MSTFA) to yield the trimethylsilyl (TMS)-derivatives. To verify whether the administration of such products could lead to positive doping tests, a pilot excretion study on “Energy 5” was conducted with two geldings, and urine samples were collected. Gas chromatography - high resolution mass spectrometry (GC-HRMS) after solid phase extraction and mixed derivatisation has demonstrated the presence of the stanozolol metabolite 16β-hydroxy-stanozolol in urine samples after “Energy 5” application.